2013 KLEEMANN MC110Z for sale in Antioch, TN
Feed capacity up to approx. 1) 300 t/hFeed size max. 41" x 26" (1,050 mm x 650 mm)Feed height 13' 11" (4,240 mm)Hopper capacity 7.9 yd³ (6 m³ )Optional - 11.8 yd³ (9 m³ )Vibrating feederWidth x length 40" x 9' 2" (1,000 x 2,800 mm)Independent pre screenType double-deck heavy-duty screenWidth x length 40" x 7' 3" (1,000 x 2,200 mm)Fines conveyorWidth x length 26" x 13' 2" (650 x 4,000 mm)Optional - 26" x 19' 8" (650 x 6,000 mm)Discharge height approx. 8' 10" (2,700 mm)Optional - 9' 10" (3,000 mm)CrusherSingle toggle jaw crusher type SStR 1100Crusher inlet width x depth 44" x 28" (1,100 x 700 mm)Crusher weight approx. 35,200 lbs (16,000 kg)Crusher drive approx. hydraulic, 177 hp (132 kW)Range of setting 2) 2.4" - 5.1" (60 - 130 mm)Gap setting fully hydraulicCrushing capacity 3)At CSS 2.4" (60 mm): approx. from - to 95 - 110 t/hAt CSS 3.3" (85 mm): approx. from - to 125 - 160 t/hAt CSS 3.9" (100 mm): approx from - to 145 - 190 t/hAt CSS 5.1" (130 mm): approx. from - to 180 - 240 t/hMain discharge conveyorWidth x length 48" x 31' 10" (1,200 x 9,700 mm)Discharge height approx. 11' 2" (3,400 mm)Crawler chassisType D6DriveDrive concept diesel-electric-hydraulic driveEngine power - Caterpillar C-9 (USA) 350 hp (261 kW)Engine power - Scania DC-9 357 hp (266 kW)Screening unitType single-deck vibrating screenWidth x length 4' 4" x 11' (1,300 x 3,340 mm)Discharge height oversize conveyor approx. 9' 6" (2,900 mm)Discharge height fines conveyor approx. 9' 9" (2,970 mm)TransportTransport height approx. 12' (3,650 mm)Transport length without screening unit approx.with screening unit approx.48' 4" (14,730 mm)57' 10" (17,640 mm)Transport width without/with screening unit 9' 10" (3,000 mm)Transport weight without screening unit approx.with screening unit approx.103,600 lbs (47,000 kg)116,800 lbs (53,000 kg)1) depending on the kind and composition of feeding material, feeding size,kind of primary screening and size of end product.2) the range of gap setting can be altered by using different toogle plates and/or jaw plates3) for hard rock, CSS = Close Side Setting
|